Dry-Wall Applicators (usually called Installers) attach dry-wall panels to the inside framework of houses and other buildings. Dry-wall consists of a thin wall of plaster sandwiched between two pieces of heavy paper and is applied to the ceilings and interior walls of a building by the Installer.

 JOB DUTIES   

Dry-Wall Applicators may:

Cut and fit wallboard to studding and joists

Mark measurements on wallboard

Cut out openings in the wall panels for electric outlets, plumbing

connections, and air-conditioning units

Fit and attach wallboard to supports

Trim rough edges of wallboard to obtain an even joint

Install metal corners and stop beads

Tapers may:

Mix sealing compound and spread it over joints between boards

Press paper tape over the joint to imbed it in the compound and seal the joint

Apply fiberglass tape to the joint

Spread and smooth cementing material over the tape to blend the joint with the wall surface

Fill nicks and cracks in walls and ceilings

Sand rough spots after cement has dried

Tapers may specialize in sanding taped joints, bumps, and other rough areas and be known as dry-wall sanders; when sealing joints between wallboard using a machine, they are called machine wallboard Tapers.

Click here to see Drywall Installers at work!

The tools, equipment, and materials used by Dry-Wall Installers may include:

Dry-wall Installers may specialize in several areas such as hanging dry-wall panels on metal framework in offices, schools, and other large buildings. This sometimes requires making floor-to-ceiling frames and erecting suspended ceilings. They may also specialize in these areas:

842.361-030 DRYWALL APPLICATORS and

842.684-014 DRY-WALL APPLICATORS (usually called Installers) attach dry-wall panels to the inside framework of houses and other buildings. Dry wall consists of a thin wall of plaster sandwiched between two pieces of heavy paper and is applied to the ceilings and interior walls of a building by the Installer.

842.664-010 TAPERS (usually called Dry-Wall Finishers) seal the joints between plasterboard or other wallboards to prepare wall surfaces for painting or other treatment.

In addition to learning about these specialties, you may also find it helpful to explore the following Career Exploration scripts:

[back to top]

WORKING CONDITIONS AND REQUIREMENTS

Dry-Wall Applicators (Installers) are usually assisted by a helper because dry-wall panels are too heavy and cumbersome for one person to handle. They perform as a team when installing a ceiling. Tapers (Finishers) may work with a crew.

They work indoors, sometimes in cramped or uncomfortable areas. They may encounter such hazards as falls from ladders or scaffolding, muscle strains from lifting, and injury from handling materials or tools. Tapers are also exposed to wetness from water used to mix sealing compound, while Dry-Wall sanders come into contact with fumes and dust from sealing and cementing material.

They usually work 40 hours per week, but sometimes work longer. Because they work indoors, they do not lose time and pay when the weather is bad unlike many construction workers. They may be required to travel to different construction sites and furnish their own transportation.

Dry-Wall Applicators and Tapers are usually required to buy their own tools.

Dry-Wall Applicators and Tapers may be asked to join a union. Some Applicators belong to the United Brotherhood of Carpenters and Joiners of America . Some Tapers belong to the International Brotherhood of Painters and Allied Trades. Individuals who are members of a union must pay dues.

You Should Prefer:

Activities involving processes or techniques

Activities dealing with things and objects

Activities which produce observable results

You Should Be Able To:

Direct or plan an activity

Attain set limits or standards

See differences in form and surfaces (if a Taper)

Do simple arithmetic accurately

Make decisions based on measurable standards

Math Problem You Should Be Able to Solve:

If a room is 10 feet by 10 feet and the ceiling is 8 feet high, how many square feet of dry-wall will it take to complete the walls?

Reading Example You Should Be Able to Read and Comprehend:

A consumer is anyone who buys goods or services for personal use. At one time or another, everyone is a consumer.

Writing Example You Should Be Able to Produce:

You should be able to write a letter of apology to any customer that you may have angered while on the job.

Thinking Skill You Should Be Able to Demonstrate:

You should be able to decide the most efficient way to dry-wall a house so you don't waste any time.

Some employers require a driver's license.  

The State of Michigan requires a license for this occupation. Click here for "Michigan Licensed Occupations," see Residential Maintenance and Alteration Contractor for specific licensing information.

EDUCATION AND PREPARATION OPPORTUNITIES

NOTE: On-The-Job Training provided by the employer and a High School Diploma or Equivalent may qualify a person for this occupation.

The following education and preparation opportunities are helpful in preparing for occupations in the Career Exploration scripts:

***SCHOOL SUBJECTS***

0500 BUILDING TRADES , 0700 CAREERS , 0900 COMMUNICATIONS , 2200 MATH , 2900 SCIENCE , 3200 TECHNICAL DRAWING , 3300 TECHNOLOGY , 3400 WOODS

***VOCATIONAL EDUCATION PROGRAMS***

There are no Vocational Education Programs related to this Career Exploration scripts.

Students should obtain the local Education & Training Opportunities for information on what happens to students who successfully complete a program. This information is available at each high school or career/technical center

***POSTSECONDARY PROGRAMS***

There are no Postsecondary Programs related to this Career Exploration scripts.  

Search for a College and/or Instructional Program

***APPRENTICESHIP OPPORTUNITIES***

Although this occupation has apprenticeship programs available in Michigan, they are limited in number. See the Sources Of More Information below for name, address and phone number of the Bureau of Apprenticeship and Training.

 Click here for a more extensive list of information sources for Apprenticeships.  

***MILITARY TRAINING PROGRAMS***

There are no Military Programs related to this Career Exploration scripts

E-Learning Courses and Programs

[back to top]

OPPORTUNITIES FOR EXPERIENCE AND METHODS OF ENTRY

You may gain experience through part-time work as an Installer's helper, laborer, or taper (dry-wall finisher).

School-to-Work opportunities include:

Informal apprenticeships

Mentorships

Job shadowing experiences

Touring a local Dry-Wall Installer employer

Internships

Volunteer work with a Dry-Wall Installer employer

Community service work with an agency

Most Dry-Wall Installers find jobs by applying directly to employers such as dry-wall contractors and general contractors. Assistance in locating a job may be obtained from local unions such as the Carpenters' District Council or the Painters' District Council, local offices of Michigan Works!, and newspaper want ads. In addition, you should access and search the Internet's on-line employment services sites such as:

You should also enter an electronic resume on these on-line services.

EARNINGS AND ADVANCEMENT

Dry-Wall Applicators' and Tapers' earnings depend on union affiliation, economic factors affecting construction, and whether they are self-employed. Earnings of self-employed Installers and of Installers who are paid on a piecework basis also vary with individual skill and productivity.

Nationally, in early 2009, basic hourly wage rates for Dry-Wall Installers and Tapers working in residential construction averaged $24.45. Some experienced, unionized workers in commercial construction were paid $36.31 an hour. Some contractors pay Installers and Tapers by the amount of work they complete. Median weekly earnings were $559 in 2008. The median weekly earnings of "all" workers in the U.S. were $722 in 2008.

Most non-union Dry-Wall workers are paid on a piecework basis, or subcontract their labor skills. Those who are paid hourly rates may receive premium pay for overtime.

Union apprentices generally start at 50% of the journeyperson rate and wages increase at periodic intervals while they are in training.

Hourly rates, including fringe benefits, for unionized commercial Dry-Wall Finishers in several Michigan areas were (early 2009):

Benefits depend upon the employer and union affiliation. They may include health and life insurance, paid vacations and holidays, and pension plans. Employees and employers may jointly contribute to a union trust fund used to pay for certain benefits.

Advancement from Dry-Wall Applicator or Taper to supervisor or dry-wall contractor may require leadership ability as well as additional education and training.

[back to top]

EMPLOYMENT AND OUTLOOK

There were about 240,200 Dry-Wall Installers, Ceiling Tile Installers and Tapers employed nationally in 2006. Employment for this occupation is expected to grow about as fast as the average for all occupations through the year 2016. Additionally, about 23.4% of them were self-employed. The industry distribution for Dry-Wall Installers, Ceiling Tile Installers and Tapers looked like this:

To find employers, click Employer/Business Locator.

The number of new workers needed each year may vary, however, because construction activity fluctuates. Opportunities may be more favorable in commercial construction, which is usually less sensitive to changes in interest rates than residential construction. Opportunities will be best with large construction companies in metropolitan areas. Smaller construction companies may not have enough work to hire full-time dry-wall installers.

About 3,600 Dry-Wall, Ceiling Tile Installers and Tapers are employed in Michigan. Most Dry-Wall Installers worked in the construction industry, primarily for contractors that specialize in dry-wall construction. Others worked for contractors that do other specialized types of construction or all kinds of construction. In late 2008, there were about 25 apprentices in training for this occupation, and 0 completed the apprentice program during the prior 12 months.  

MICHIGAN'S EMPLOYMENT OUTLOOK TO 2014

MSA designates a Metropolitan Statistical Area.

SOURCES OF ADDITIONAL INFORMATION

[back to top]

Copyright © 2009 Michigan Department of Energy, Labor & Economic Growth