Skip to main content

Radon Resistant New Construction

Contact

Les Smith
Radon@Michigan.gov
800-723-6642 (800-RADONGAS)

Find a radon test kit

Radon-Resistant Construction Is Easy and Inexpensive!

There are simple techniques specific to radon-resistant construction, and when combined with other good building practices, the process of building a radon-resistant home is relatively easy and inexpensive. Special skills are not required to perform this type of work. These techniques and materials are commonly used in the construction of a new home.

Radon occurs naturally in soil and rock and can enter buildings through openings in the foundation floor or walls. Long-term exposure to elevated indoor radon levels can increase your risk of lung cancer, and since any home could have a problem, all homes should be tested.

The good news is, when elevated radon levels are found, they can be reduced, and new homes can be built using radon-resistant construction techniques. If you are building a home, talk to your builder about including a passive radon control system in the construction process. It is an inexpensive addition to the total cost of your new house and is an easy way to help reduce the risk of a radon problem. Currently, the Michigan Residential Building Code requires radon-resistant construction techniques in nine Michigan counties: Branch, Calhoun, Cass, Hillsdale, Jackson, Kalamazoo, Lenawee, St. Joseph, and Washtenaw. However, elevated radon levels have been found in every Michigan county and radon-resistant construction techniques are recommended for all homes statewide.

If an elevated radon level is found after the home is completed, the problem can still be fixed. Your passive radon mitigation system can be "activated" to provide further radon reduction. This is accomplished by adding an in-line fan to the existing system, and this simple upgrade will almost always achieve results that are well below the U.S. Environmental Protection Agency guideline of 4 picocuries per liter of air (4 pCi/L).

Radon-Resistant Construction Is Easy and Inexpensive!

There are simple techniques specific to radon-resistant construction, and when combined with other good building practices, the process of building a radon-resistant home is relatively easy and inexpensive. Special skills are not required to perform this type of work. These techniques and materials are commonly used in the construction of a new home.

Simple Steps

  • Gas Permeable Layer - Install at least a 4" layer of clean gravel or aggregate beneath the slab or flooring system to allow soil gases to move freely beneath the home.
  • Impermeable Layer - Cover that layer with a vapor barrier (plastic or polyethylene sheeting) to help prevent radon and other soil gases from entering the home.
  • Vent Pipe - Run a 3-inch or preferably a 4-inch PVC pipe routed vertically (i.e., no turns or elbows) through the middle of the house from the gas permeable layer up through the roof.
  • Caulking and Sealing - Caulk and seal all openings in the foundation floor or walls (including the slab perimeter) with a polyurethane caulk to reduce the potential for soil gas entry.
  • Junction Box - Install an electrical box (outlet) in the attic in case a fan is needed to reduce radon levels further.

The average cost of installing a passive radon control system may be $350-$500. If you're building a home, make sure your builder uses these techniques to make your new home radon-resistant! Then test it to determine the radon levels, and if there's still a problem, simply have the system activated by installing a radon fan. Though builders are not required to use radon-resistant techniques in homes built in some counties, you may want to request that the builder incorporate these techniques during construction of your new home.

Benefits of a Passive Radon Mitigation System:

  • The techniques are simple and inexpensive.
  • Typically reduces radon levels by about 50%.
  • The system may reduce concentrations of other soil gases as well.
  • The system can increase energy efficiency.
  • The system may help control moisture and sometimes even eliminate that "musty smell" common in basements.

If elevated radon levels are found, the passive system can easily be upgraded to an active system that will provide further radon reduction.

For more detailed information about radon-resistant new construction, check out the following: