Preliminary information for the Wholesale Marihuana Tax is now available.
Approved: September 20, 2016
(Replaces Revenue Administrative Bulletin 1999-2)
Note: This RAB was replaced by RAB 2019-15 on November 12, 2019.
Pursuant to MCL 205.6a, a taxpayer may rely on a Revenue Administrative Bulletin issued by the Department of Treasury after September 30, 2006, and shall not be penalized for that reliance until the bulletin is revoked in writing. However, reliance by the taxpayer is limited to issues addressed in the bulletin for tax periods up to the effective date of an amendment to the law upon which the bulletin is based or for tax periods up to the date of a final order of a court of competent jurisdiction for which all rights of appeal have been exhausted or have expired that overrules or modifies the law upon which the bulletin is based.
RAB 2016-18. This Revenue Administrative Bulletin (RAB) explains application of the General Sales Tax Act and the Use Tax Act (Acts) to the construction industry generally, and to contractors specifically. A “contractor” is a person directly engaged in the business of constructing, altering, repairing, or improving real estate for others; and includes a prime, general, or subcontractor. Mich Admin Code, R 205.71. This RAB replaces RAB 1999-2. This RAB reflects the following legislation enacted after the issuance of RAB 1999-2: 1999 PA 116, 117; 2004 PA 173; 2006 PA 665, 666; 2008 PA 555, 556; 2012 PA 474, and; 2014 PA 53, 54. This RAB also reflects the adoption of Mich Admin Code R 205.8. This RAB does not address the tax base for a manufacturer/contractor that affixes its product to the real estate of others, or the distinction between tangible personal property and real property. Those topics are discussed in detail in other RABs.
1. Taxable Sales to Contractors and Use Tax for Conversion
A. What sales or use tax liability does a contractor incur when engaged in the business of constructing, altering, repairing, or improving real estate for others?
B. Is a contractor required to pay sales or use tax on all items used to provide the contractor’s service, including equipment, supplies, and materials?
C. May a contractor charge sales or use tax to his or her customer?
D. Is a contractor required to pay sales or use tax if the contractor acquires, but does not purchase or own, the tangible personal property used or consumed to perform a contract?
E. Is a contractor required to pay sales or use tax on tangible personal property used or consumed in construction that takes place within or outside of Michigan?
F. Is a contractor required to pay use tax if the contractor converts to a taxable use tangible personal property acquired for an exempt use?
G. Does a general contractor have joint and several liability for the payment of sales and/or use tax on materials used or consumed by an independent subcontractor?
2. Exempt Sales to Contractors and Core Charge Credit and Refund
A. When does a real property contractor qualify for an exemption from sales and/or use tax for property affixed to and made a structural part of real estate in the following contexts:
B. Is a contractor liable for sales or use tax for property affixed to and made a structural part of real estate when it receives a claim of exemption for an exempt purpose?
C. What information is required to support a claim of exemption?
D. What is core charge credit and refund, and what equipment qualifies?
3. Contractors Engaged in Retail Sales
A. When is a contractor engaged in the business of making sales at retail?
B. What sales and use tax responsibilities does a contractor have when engaged in the business of making sales of tangible personal property at retail?
C. Is a contractor who is also a retailer required to be licensed under the General Sales Tax Act?
D. Is a contractor who is also a retailer required to pay sales or use tax when tangible personal property is removed from resale inventory in Michigan and used by the contractor in performing a construction contract?
4. Suppliers
A. Who is a “supplier” for sales and use tax purposes?
B. Is a supplier liable for the collection and payment of sales and use tax to the Department of Treasury?
C. What sales or use tax liability arises when a subcontractor affixes to real estate property that was sold in a retail transaction?
A. The General Sales Tax Act imposes tax at rate of 6% on retail sales of tangible personal property in Michigan unless the sale is otherwise exempt. MCL 205.52(1). A contractor incurs sales tax liability when it sells tangible personal property at retail even if the property was originally purchased with a claim of exemption. See infra Conclusions Section 3. Contractors Engaged in Retail Sales.
The Use Tax Act imposes tax on tangible personal property that is used, stored, or consumed in Michigan at a rate of 6% of the purchase price, unless sales tax was paid when the property was purchased. MCL 205.93(1). For purposes of use tax, contractors are “consumers” of materials used and/or consumed by them when engaged in the business of constructing, altering, repairing, or improving real estate of others. MCL 205.92(g)(i); See also Rule 205.8. Therefore, if sales tax was not paid on the property a contractor purchased for the constructing, altering, repairing, or improving of real estate of others, the contractor is liable for use tax based on the purchase price of the property.
Example 1: Contractor is also a retailer. Contractor purchases building materials exempt from sales tax claiming a resale exemption. Contractor eventually removes the materials from retail inventory and uses the materials to perform a construction contract. Contractor is liable for use tax based on the purchase price of the materials consumed in the construction.
B. A contractor is required to pay sales or use tax on all items used to provide the contractor’s service, including equipment, supplies, materials (including materials affixed to and made a structural part of real estate located in Michigan), and any other non-exempt tangible personal property it uses or consumes.
C. A contractor acting as a retailer may charge sales tax on property it sells to a customer at retail. “Although the legal incidence of the sales tax falls on the retailer, the retailer is authorized to pass the economic burden of the tax onto the purchaser by collecting an equal amount at the point of sale.” Ammex, Inc v Dep’t of Treasury, 237 Mich App 455, 460 (1999). A contractor that pays sales or use tax on the property it uses and consumes in performing a construction contract, such as equipment, supplies, and materials, may not charge sales or use tax directly to its customer. However, the contractor may include the amount of the tax in the total contract price as an overhead cost.
D. A contractor is required to pay use tax if the contractor acquires tangible personal property that it affixes to real property of others in Michigan, even if the contractor does not purchase or own the tangible personal property, if sales or use tax has not already been paid on the property. MCL 205.92(g)(i) (a person is a consumer of tangible personal property, and therefore liable for use tax, if the person is “acquiring tangible personal property [and is] engaged in the business of constructing, altering, repairing, or improving the real estate of others.”).
Example 2: Nonprofit School purchases building materials in a tax-exempt retail transaction and provides the materials to Contractor for use or consumption in performing a contract upon the school's real property. Contractor is liable for use tax on the purchase price of tangible personal property used or consumed in performing the contract, including the tangible personal property provided it by the school.
E. Absent a valid claim of exemption, (see infra Conclusions Section 2. Exempt Sales to Contractors) a contractor is required to pay sales tax on property it purchases in Michigan for affixation within or outside of Michigan if the retailer exercises its right to reimburse itself for the tax. Ammex, supra. However, a contractor is not required to pay Michigan use tax on tangible personal property acquired in Michigan for use in a construction project that takes place exclusively outside of Michigan. MCL 205.94(1)(z).
Example 3: Contractor enters a contract with Customer to build a residential home in Michigan. Contractor purchases the materials to build the home from Retailer. Contractor has no valid claim of exemption; therefore, Retailer is liable for sales tax and may charge sales tax to Contractor. Contractor may include the amount of the tax as an overhead cost in the contract with Customer, but may not directly seek reimbursement from Customer.
Example 4: Contractor enters a contract with Customer to build a residential home in Michigan. Contractor purchases from Retailer the materials to build the home and provides an Exemption Certificate for purposes of resale to the Retailer. Contractor does not make a retail sale to Customer. Retailer is not liable for sales tax on the sales to Contractor because Retailer received an Exemption Certificate. However, Contractor (which improperly claimed the exemption), is liable for use tax on the purchase price of all of the property it purchased exempt for resale and consumed in performing the contract for Customer. Contractor may include the amount of the tax as an overhead cost in the contract with Customer, but may not directly seek reimbursement from Customer.
Example 5: Contractor also acts as a retailer and has an inventory of property that it purchased exempt from sales tax for purposes of resale. Contractor enters a construction contract with Customer to remodel a home located in Ohio. Contractor withdraws property from its retail inventory to perform the contract, but does not make a retail sale of the property to Customer. Contractor is not liable for Michigan use tax on the materials it uses or consumes in performing this contract.
F. A contractor that acquires tangible personal property for an exempt use, but then uses that tangible personal property for a non-exempt use, is liable for use tax based on the purchase price of the property, whether the non-exempt use is in whole or in part, or permanent or not permanent, and regardless of any subsequent tax-exempt use. See MCL 205.93(1), MCL 205.92(q), and MCL 205.97(2).
G. A general contractor is not jointly and severally liable for sales or use tax on materials consumed by an independent subcontractor. If a general contractor hires a subcontractor, and the subcontractor consumes property by affixing it to real estate without properly paying its sales and use tax liability on the property, the general contractor is not liable for the subcontractor’s failure because it is the subcontractor that is the consumer of the property.
A. Exemptions.
A contractor in the business of constructing, altering, repairing, or improving real estate for others is afforded an exemption for property affixed to or made a structural part of real estate that qualifies under one of the following:
Property sold to a contractor to be affixed to and made a structural part of a “nonprofit hospital” is exempt. The Acts provide that a “Nonprofit hospital” means one of the following:
1. That portion of a building to which one of the following applies:
A. Is owned or operated by an entity exempt under IRC 501(c)(3), that is licensed (1978 PA 368, MCL 333.21501 to 333.21571) as a hospital. Under part 215 of the public health code.
B. Is owned or operated by a governmental unit in which medical attention is provided. “Medical attention” means “that level of medical care in which a physician provides acute care or active treatment of medical, surgical, obstetrical, psychiatric, chronic, or rehabilitative conditions, that require the observation, diagnosis, and daily treatment by a physician.” MCL 205.54w(3)(c); MCL 205.94s(3)(c).
C. Is owned or operated by an entity or entities exempt under IRC 501(c)(2) or (3) in which medical attention is provided.
2. That portion of real property necessary and related to a building described in 1. above in which medical attention is provided.
3. A county long-term medical care facility, including any addition to an existing county long-term medical care facility, if the addition is owned and operated by either the county or the county long-term medical care facility and offers health services provided by the county long-term medical care facility. Until January 1, 2008, an exemption under this section existed regardless whether the addition was licensed as a nursing home or skilled nursing facility under part 217 of the public health code, 1978 PA 368, MCL 333.21701 to 333.21799e, or whether the addition met the requirements set forth in paragraph 1. above.
“Nonprofit hospital” does not include (MCL 205.54w(3)(b), MCL 205.94s(3)(b)):
(i) A freestanding building or other real property of a licensed nursing home or skilled nursing facility. 1978 PA 368, MCL 333.21701 to 333.21799e. Under part 217 of the public health code;
(ii) A licensed hospice, 1978 PA 368, MCL 333.21401 to 333.21420. Under part 214 of the public health code, or;
(iii) A licensed home for the aged. 1978 PA 368, MCL 333.21301 to 333.21335. Under part 213 of the public health code.
A “county medical care facility” is “a nursing care facility, other than a hospital long-term care unit, that provides organized nursing care and medical treatment to 7 or more unrelated individuals who are suffering or recovering from illness, injury, or infirmity and that is owned by a county or counties.” MCL 333.20104(3). Operations not requiring licensure, such as “assisted living facilities,” do not qualify as a hospital for the construction exemption, Id.
The exemption for county long-term medical care facilities is limited to tangible personal property that ultimately has a physical connection to any addition to or renovation of an existing building of a county long-term medical care facility. In the case of an addition, the addition must be owned and operated by either the county or the county long-term medical care facility and it must offer health services provided by the county long-term medical care facility. The exemption is only available for newly constructed buildings if the building has a physical connection to an existing county long-term medical care facility building (e.g., by breezeway). If no such physical connection exists the exemption may not be claimed.
The exemption does not apply to any portion of property otherwise qualifying for the exemption if income or a benefit inures directly or indirectly to an individual, private stockholder, or other private person from the independent or nonessential operation of that portion of property. If benefit from any portion of the real estate inures to an individual or a private shareholder in the manner described in the Acts, that portion of the real estate does not qualify for the exemption, even if it is owned by a qualified nonprofit hospital. Commercial ventures such as shopping center retail store buildings held as an investment do not qualify for exemption. In instances where a single building is being constructed that will have multiple uses, some of which do not qualify as a “nonprofit hospital” as described above, only the portion of the building that qualifies as a “nonprofit hospital” under the Acts is exempt.
Example 6: Medical Center is a nonprofit hospital. A portion of Medical Center is constructed to house a retail gift shop that will be operated by ABC Inc. Profits made by ABC inure to its private owner. The portion of Medical Center that is constructed to house the retail gift shop is not eligible for the exemption.
The exemption only includes property that is affixed to and made a structural part of the nonprofit hospital. The exemption does not include tools and equipment or supplies used and consumed in the construction which do not become a structural part of the hospital, e.g., sandpaper, hammers, saws.
2. Qualified Nonprofit Housing
Property sold to a contractor to be affixed to and made a structural part of qualified nonprofit housing is exempt. Only private qualified nonprofit housing that is exempt under section 15a of the state housing development authority act of 1966, 1966 PA 346, MCL 125.1415a, qualifies for this exemption. Public nonprofit housing is not covered by the state housing development authority act and does not qualify for this exemption. MCL 205.54w(1); MCL 205.94s(1).
The Acts do not allow the exemption if income or a benefit inures directly or indirectly to an individual, private stockholder, or other private person from the independent or nonessential operation of that portion of property. MCL 205.54w(2); MCL 205.94s(2). If benefit from any portion of the real estate inures to an individual or a private shareholder in the manner described in the Acts, that portion of the real estate will not qualify for the exemption, even if it is owned by a nonprofit housing entity.
The exemption only includes property that is affixed to and made a structural part of the nonprofit housing. The exemption does not include tools and equipment or supplies used and consumed in the construction which do not become a structural part of the non-profit housing, e.g., sandpaper, hammers, saws.
3. Church Sanctuaries
Property sold to a contractor to be affixed to or made a structural part of a “sanctuary” is exempt. MCL 205.54p(1); MCL 205.94m(1). A “sanctuary” is that portion of a building used predominantly and regularly for public worship, and those portions of a building structurally necessary to the portion of the building where worship takes place. MCL 205.54p(2)(b); MCL 205.94m(2)(b). Predominant use will be presumed if public worship occurs more than 50% of the time that the portion of the building is in use. “Use” includes passive uses, such as storage. Regular use means the normal or usual periodic use or uniform use of that portion of the building. The exemption does not apply to the entire building, but applies only to materials affixed to or made a structural part of the sanctuary portion of a building. The building also must be owned and occupied by a religious organization qualified under IRC 501(c)(3) to qualify as a sanctuary.
The exemption only includes property that is affixed to or made a structural part of the sanctuary. The exemption does not include tools and equipment or supplies used and consumed in the construction which do not become a structural part of the sanctuary, e.g., sandpaper, hammers, saws.
“Those portions of a building where public worship takes place” means those areas where the public participates in worship, including areas dedicated to individual worship such as chapels, and those portions of a building whose sole use and function is directly related to the act of public worship. These areas include a sacristy or similar area adjacent to the room where public worship services are conducted or areas where consumables are prepared for use in the worship service. It includes a vestry or similar area adjacent to the room where public worship services are conducted or where clergy or other religious leaders prepare for public worship services. It does not include areas for social functions, day care, schooling, religious education, or any other activity that does not constitute public worship.
“Those portions of a building structurally necessary to the portion of the building where worship takes place” means those structural portions of the building directly connected to the area where public worship takes place such as: (i) foundations, including basement walls which support the interior worship area; (ii) exterior walls and their finishing materials directly adjacent to the interior worship area; (iii) interior walls, floors and ceilings facing the interior worship area, and; (iv) roofs directly over the interior worship area. Exterior walls, foundations and roofs that extend beyond the interior worship area are not exempt. Roofs not directly over the interior worship area, such as roofs over a second story office that is above the interior worship area, are not exempt, but may be included in the apportionment formula described below.
Structural necessity includes building utilities such as heating, ventilating and air conditioning devices. In instances where a single piece of equipment, such as a furnace, is supplying qualified sanctuary areas as well as other non-exempt areas, a percentage must be developed to represent the exempt portion of the device. The percentage is a fraction, the numerator of which is the square footage of the sanctuary and the denominator of which is the total square footage of the entire building, including all regularly heated or cooled areas such as basements. Other reasonable methods of apportioning a sanctuary’s taxable and exempt use may be applied if they are approved by the Department. This same percentage may be applied to total material purchases for multiple use areas such as roofs and foundations in lieu of accounting for actual cubic yards of concrete or squares of roof shingles directly under or over the sanctuary.
Building areas generally not provided exemption include gymnasiums, offices, vestibules, hallways, restrooms, basements and classrooms. Outdoor areas such as parking lots, sidewalks and steps leading into a building are not exempt. Also not exempt are finishing materials affixed to basement foundation walls or attached to walls common to the sanctuary, but constituting the interior walls of space dedicated to any activity other than public worship. Basement floors and second story flooring are not exempt.
4. Qualified Water or Air Pollution Control Facilities
Tangible personal property that is installed as a component part of a water or air pollution control facility is exempt. MCL 205.54a(1)(l); MCL 205.94(1)(s). However, the State Tax Commission must certify the facility before a contractor may qualify for the exemption; however, after a certificate is granted, refunds may be authorized. The exemption is not available before receipt of a signed exemption certificate from the State Tax Commission. This exemption may include portions of real property as well as equipment and other items of tangible personal property, provided that the tangible personal property must be installed as a component part of the qualified water or air pollution control facility.
5. Qualified Convention Facilities
Before January 1, 2016, the sale or acquisition of tangible personal property for use in construction or renovation of a “qualified convention facility” is exempt from sales and use tax. MCL 205.54d(m); MCL 205.94z.
A “qualified convention facility” is a publicly owned convention facility with not less than 600,000 square feet of usable exhibition area and that is located in a qualified city. MCL 141.1355(k).
6. Qualified Data Centers
Beginning January 1, 2016, through December 31, 2035, data center equipment that is affixed to or made a structural part of a qualified data center is exempt from the sales and use tax. MCL 205.54ee(1); MCL 205.94cc(1). The exemption may be repealed earlier if certain job creation targets are not met. The Department of Talent and Economic Development is responsible for tracking the jobs requirements of the Acts and reporting the information to the Department of Treasury.
For purposes of this exemption, “data center equipment” means only:
[C]omputers, servers, routers, switches, peripheral computer devices, racks, shelving, cabling, wiring, storage batteries, back-up generators, uninterrupted power supply units, environmental control equipment, other redundant power supply equipment, and prewritten computer software used in operating, managing, or maintaining the qualified data center or the business of the qualified data center or a colocated business. Data center equipment also includes any construction materials used or assembled under the qualified data center's proprietary method for the construction or modification of a qualified data center, including, but not limited to, building materials, infrastructure, machinery, wiring, cabling, devices, tools, and equipment that would otherwise be considered a fixture or related equipment. Data center equipment does not include any equipment owned by a third party that is used to supply the qualified data center's primary power. MCL 205.54ee(4)(c); MCL 205.94cc(4)(c).
“Qualified data center” means:
a. a facility composed of 1 or more buildings located in this state;
b. which is owned or operated by an entity engaged at that facility in operating, managing, or maintaining a group of networked computers or networked facilities for the purpose of centralizing, or allowing 1 or more colocated businesses to centralize, the storage, processing, management, or dissemination of data of 1 or more other persons who is not an affiliate of the owner or operator of a qualified data center or of a colocated business; and
c. the entity that owns or operates the facility receives 75% or more of its revenue from colocated businesses that are not an affiliate of the owner or operator of the qualified data center. MCL 205.54ee(4)(d); MCL 205.94cc(4)(d).
7. Indian Tribes
Affixing property to a structural part of certain qualifying real property that is associated with federally-recognized Indian Tribes (and their qualifying members) that have an effective and implemented Tax Agreement with the State of Michigan is exempt. Tax Agreements are public and may be found at the Michigan Department of Treasury’s Taxes page.
8. Qualified Business Activity (Enterprise Zones)
Tangible personal property used in a qualified business activity of the purchaser is exempt from sales and use tax. MCL 205.54j; MCL 205.94h. A “qualified business activity” is a “business activity in an enterprise zone established before 1994 of a qualified existing business attributable to a new facility or the business activity in an enterprise zone established before 1994 of a qualified new business.” MCL 125.2103(l).
9. Foundations for Certain Machinery or Equipment used in Industrial Processing
The Acts exempt “foundations for machinery or equipment…used in an industrial processing activity.…” MCL 205.54t(4)(b); MCL 205.94o(4)(b). “Industrial processing” is “the activity of converting or conditioning tangible personal property by changing the form, composition, quality, combination, or character of the property for ultimate sale at retail or for use in the manufacturing of a product to be ultimately sold at retail or affixed to and made a structural part of real estate located in another state.” MCL 205.54t; MCL 205.94o. Property that is affixed to and made a structural part of real estate located in another state is exempt from use tax, but not sales tax. For a more detailed discussion of the industrial processing exemption see the Industrial Processing RAB.
Example 7: Contractor constructs a foundation for a machine press for use in industrial processing by Manufacturer. The foundation is exempt from sales and use tax.
10. Property to be affixed to and becoming a structural part of real estate located outside Michigan (use tax only)
Effective January 1, 2005, property that is purchased by a contractor for the purpose of constructing, altering, repairing, or improving real estate for others and that is affixed to and made a structural part of real estate located in another state is exempt from use tax. MCL 205.94(1)(z). However, there is no corresponding sales tax exemption. Therefore, when a contractor purchases property for affixation in another state from a Michigan retailer, absent another reason to claim exemption, the contractor has no basis to claim a sales tax exemption. Even if the purchaser makes an invalid claim of exemption, the retailer is not liable unless they’re involved in a fraud.
B. Other Exemptions
When a contractor receives an exemption claim from its customer other than those described above, such as the industrial processing exemption (the industrial processing exemption excludes “[t]angible personal property permanently affixed and becoming a structural part of real estate in this state…” MCL 205.54t(5)(a); MCL 205.94o(5)(a). However, the industrial processing exemption does include foundations for machinery or equipment used in industrial processing. MCL 205.54t(4)(b); MCL 205.94o(4)(b)) or a direct pay authorization, MCL 205.98(1), the contractor is liable for any property it affixes to real estate despite the exemption claim. To the extent that the property the contractor uses or consumes remains tangible personal property, the property is exempt if the contractor receives a valid claim of exemption pursuant to MCL 205.62.
Example 8: Contractor enters into a contract with ABC Inc. The contract provides that all of the work to be done by Contractor is exempt under the industrial processing exemption. Some of the contract requires Contractor to permanently affix property to ABC’s real estate, and some of the contract requires Contractor to affix property to machinery that will maintain its character as tangible personal property after affixation (e.g., non-affixed machinery). Contractor is liable for use tax for any property it affixed to ABC’s real estate.
C. Exemption Support.
When a contractor that acts as a retailer purchases property for resale the contractor may present Form 3372 (Exemption Certificate) to the retailer indicating that the purchase is exempt for purposes of resale or, in lieu of an exemption certificate, other identifying information of the contractor and the reason for claiming the exemption, either in paper or electronic format. To claim any of the other exemptions listed above, the contractor may provide an Exemption Certificate, or other identifying information and the reason for claiming the exemption, indicating the purchaser is a contractor, and should also provide Form 3520 (Contractor Eligibility Statement) containing identifying information from the property owner and the reason for claiming the exemption. Both forms are available on the Department’s website.
The contractor should retain a copy of the Contractor Eligibility Statement. Where appropriate, a contractor may also wish to retain other documentation, including copies of a Michigan State Housing Development Authority ruling, a hospital license from the Michigan Department of Public Health, a State Tax Commission certification, or an IRS 501(c)(3) ruling letter. If a contractor pays sales tax to the retailer on property it purchases for affixation that property is exempt from use tax. MCL 205.94(1)(a). The contractor must retain documentation that demonstrates the sales tax was paid to the retailer to prove entitlement to this exemption. Andrie, supra.
A Contractor Eligibility Statement signed by the property owner does not absolve a contractor of sales or use tax liability. If it is determined, by audit or otherwise, that some or all of the property does not qualify for exemption, the contractor is liable for use tax as the consumer of that property.
Example 9: Contractor enters a contract to build a sanctuary for Church. Church indicates to Contractor that all of the areas that are being constructed are exempt areas and provides a completed Contractor Eligibility Statement. Contractor purchases all of the materials for the construction exempt from sales tax based on this assurance from Church. Contractor remits no use tax on the materials consumed in performing the contract. Upon audit it is determined that 40% of the area constructed by Contractor is used for a nonexempt purpose. Contractor is liable for use tax on the purchase price of the materials used to construct the nonexempt areas of the building.
D. Credits and Refunds for Certain Core Charges
A core charge is a deposit that is made for certain items. When the item is returned to the seller the core charge is refunded to the customer. Typically, a seller is liable for sales tax on core charges, however, “[a] person who paid sales tax on a core charge attributable to a recycling fee, deposit, or disposal fee for a component, part, or battery for heavy earthmoving equipment may calculate a credit and seek a refund from the department…in an amount equal to the sales tax paid” to the State on the core charge. MCL 205.184a.
A. A contractor is engaged in the business of making sales at retail when selling tangible personal property, such as building materials, “over-the-counter” to customers. A contractor also makes a sale at retail when the contractor sells tangible personal property in the course of performing a construction contract, and the property is not consumed, affixed to, or made a structural part of the real estate upon installation, but remains tangible personal property.
Example 10: Contractor enters into a contract with Nonprofit School to remodel the school. Nonprofit School is eligible to purchase tangible personal property exempt from sales tax. Contractor has materials in its inventory that it purchased exempt from sales tax for purposes of resale. Under the contract, Contractor will sell Nonprofit School all of the property that Contractor will affix to the real estate of Nonprofit School at retail. Nonprofit School provides Contractor a valid claim of exemption on the retail sales of the materials. Contractor is liable for use tax on the property it affixes to Nonprofit School’s real estate as the consumer of that property.
Example 11: Assume the same facts as Example 9, however, under this contract, Contractor will sell Nonprofit School all of the property that Contractor will affix and property that it will not affix (moveable book cases, desks etc.) at retail. Under these facts, Contractor is liable for use tax on the property it affixes to Nonprofit School’s real estate as the consumer of that property, however, Contractor is not liable for use tax for the property it does not affix if Nonprofit School provides and Exemption Claim (Form 3372) or equivalent information.
B. Contractors that consistently hold themselves out to the public as retailers, and therefore collect and remit sales tax pursuant to the sales tax act, are liable for sales tax based on the sales price of the property. However, if the amount remitted as sales tax from the contractor is less than the amount that would be remitted if the contractor paid sales or use tax on its purchases in performing its contracts, the contractor is liable for the difference. See IPD 2005-3.
C. A contractor that makes sales at retail (except a contractor registered under the Streamlined Sales and Use Tax Agreement who is not otherwise required to obtain a sales tax license in Michigan) must be licensed under the General Sales Tax Act. MCL 205.53; see also, Mich Admin Code, R 205.1.
D. A contractor that makes sales at retail is required to pay use tax based on the purchase price of the property when it is removed from resale inventory in Michigan and used by the contractor in performing a construction contract if the property will be affixed to or made a structural part of real estate located in Michigan. Removal of resale inventory for affixation to real estate located in another state is exempt from use tax. MCL 205.94(1)(z).
A. A “supplier,” for sales and use tax purposes, is a person in the business of selling building materials, supplies, tools, equipment, etc. to contractors at retail.
B. A supplier is liable for the collection and payment of sales or use tax to the Department when selling materials, supplies, tools, equipment, etc. to a contractor, absent an applicable exemption. A supplier may reimburse itself for the amount of sales tax on taxable sales to contractors. Ammex, supra. When an exemption is claimed by a contractor the supplier must retain an Exemption Certificate or, in lieu of an Exemption Certificate, other identifying information of the contractor and the reason for claiming the exemption, either in paper or electronic format. When the sale is for property to be affixed to and made a structural part of real estate of one of the exempt properties described in this RAB, the supplier, in addition to an Exemption Certificate or other identifying information provided, should also obtain a Contractor Eligibility Statement indicating the reason for the claim of exemption.
C. When a supplier makes a taxable sale of property to a customer, it must remit sales tax regardless whether the supplier subcontracts with a contractor for installation of the property. If the supplier collects sales tax from its customer, the contractor is relieved of paying use tax for that property if the contractor can demonstrate that the sales tax was collected by the supplier. A sales invoice from the supplier to the customer that separately states the sales tax is sufficient evidence to establish that sales tax was collected on the retail sale and will satisfy the contractor’s burden of proving its entitlement to the exemption provided in MCL 205.94(1)(a). Letter Ruling 2014-1.
Example 12: ABC Supplier sells an entry door to Customer in a retail transaction. ABC charges Customer sales tax on the sales price of the door. ABC and Customer agree that ABC will subcontract with Contractor for installation of the door. Contractor is not liable for use tax for the door so long as it can demonstrate that sales tax was collected by ABC Supplier.
