The web Browser you are currently using is unsupported, and some features of this site may not work as intended. Please update to a modern browser such as Chrome, Firefox or Edge to experience all features Michigan.gov has to offer.
Phragmites
Phragmites
Phragmites australis (frag-MY-teez), also known as common reed, is a perennial, wetland grass that can grow to 15 feet in height. While Phragmites australis is native to Michigan, an invasive, non-native, variety of phragmites is becoming widespread and is threatening the ecological health of wetlands and the Great Lakes coastal shoreline. Invasive phragmites creates tall, dense stands which degrade wetlands and coastal areas by crowding out native plants and animals, blocking shoreline views, reducing access for swimming, fishing, and hunting and can create fire hazards from dry plant material.
Invasive Phragmites can be controlled using an integrated pest management approach which includes an initial herbicide treatment followed by mechanical removal (e.g., cutting, mowing) and annual maintenance. For large areas with dense stands of invasive Phragmites, prescribed burning used after herbicide treatment can provide additional control and ecological benefits over mechanical removal. Early detection is key to preventing large dense stands and is also more cost efficient.
Great Lakes basin wide Phragmites information through the Great Lakes Phragmites Collaborative (GLPC). The GLPC is a regional partnership established to improve communication and collaboration and lead to more coordinated, efficient and strategic approaches to Phragmites management, restoration and research across the Great Lakes basin.
Phragmites Prioritization Tool
EGLE has developed a prioritization tool and user guide to help management groups prioritize the treatment and management of invasive Phragmites in Michigan. A user guide is also available that gives more details about how to use the tool and describes the criteria used for prioritization. Note – There are two slightly different versions of the tool; one for printing and filling in by hand and another for filling in electronically. With Adobe Reader XI, you can also save a file with the filled in information.
- Phragmites Treatment/Management Prioritization Tool – Printable Version
- Phragmites Treatment/Management Prioritization Tool – Fill-in Version
- User Guide for the Phragmites Treatment/Management Prioritization Tool
What You Can Do
- Determine whether the plants are native or invasive Phragmites (or another plant species). Useful websites for identification include:
- Read the following publications to better understand the management issues and control options: A Guide to the Control and Management of Invasive Phragmites, from EGLE and partners.
- Controlling invasive Phragmites may require one or more permits from local, state and federal authorities, as several environmental laws may be applicable. If necessary, apply for and obtain the appropriate permit(s):
Chemical Treatment: For inland areas (including lakes, ponds, rivers, streams, ditches, wetlands, etc.), a permit is required to treat invasive Phragmites using herbicides if the plants are in standing water at the time of treatment. Some small backyard ponds may be exempt from permitting requirements, depending on their characteristics. For shoreline areas along the Great Lakes and Lake St. Clair, a permit is required to chemically treat any plant located below the ordinary high water mark, regardless of whether there is standing water or not. EGLE's Water Resource Division has created a general permit category for this type of activity, which allows property owners to request authorization for control of invasive or non-native species through a simplified permit process.
For chemical treatment information including permitting requirements and blank permit application forms visit EGLE Inland Lakes (Select Aquatic Nuisance Control) or contact the Aquatic Nuisance Control Program, Water Resources Division, at 517-284-5593. Please read the General Permit for Aquatic Nuisance Control Activities for Certain Non-native Invasive Emergent Plants for specific information, including information about Phragmites.
The use of a licensed applicator who is certified in aquatic pest management is recommended for herbicide application, especially in large, dense stands and in sensitive areas such as wetlands: Pesticide Application Businesses Licensed by the State of Michigan. (For inland areas, search under Category 5, Aquatics; for Great Lakes shoreline, search by Category 5 for wet areas and Category 6, Right-of-Way, for dry areas).
Mechanical Treatment: Mechanical treatment (i.e., mowing) of invasive Phragmites is recommended after chemical treatment (at least 2 weeks after, for maximum effectiveness of the chemical treatment), to remove dead stems and promote native plant growth. Mowing is the most commonly used method for mechanical treatment, particularly on privately owned, or smaller properties. If mowing is used as the mechanical treatment method, the vegetation cutting should be conducted only in those areas where invasive Phragmites is present, avoiding adjacent wetland areas where native species are dominant. In wet areas, mowing invasive Phragmites as mechanical treatment is most often done in the winter when the ground is frozen, which provides better and safer access to these areas, as well as minimizes impacts to small animals and native plants. Mowing invasive Phragmites along the Great Lakes as a method of mechanical treatment requires a EGLE permit when the mowing/cutting will occur below the ordinary high water mark, is within the St. Clair Flats area, or
within a designated Environmental Area. Displacement of soil and rutting of the ground in an area of mowing/cutting may also require a permit. For more information on mechanical treatment of invasive Phragmites, please contact the Water Resources Division at 616-250-8637.
Tilling or disking of plant roots and soil is not an effective mechanical treatment method for invasive Phragmites. These activities promote the spread of invasive Phragmites, as the broken rhizomes and seeds are dispersed and sprout new growth.
Prescribed burning is another very effective method of mechanical treatment of invasive Phragmites after chemical treatment. This method is typically used on very large sites, and in more rural areas. Prescribed burning does not require a permit from the State of Michigan, but often does require approval from the local unit of government. Some municipalities require additional approvals for certain activities, such as controlled burns. Please contact your local authorities for more information.
Federal Permits - A permit from the U.S. Army Corps of Engineers is required for most activities that alter Great Lakes coastal areas (except mowing). Contact the U.S. Army Corps of Engineers Detroit District at 1-888-694-8313. - Conduct treatment following the guidelines described above, any permit requirements, and detailed in the publication A Guide to the Control and Management of Invasive Phragmites, from EGLE and partners.
- Monitoring impacts of the treatment(s) is an important part of a successful management project, and helps identify areas which require additional or follow-up chemical treatment. Monitoring can be as simple as before and after photo documentation or listing plant species growing in treated areas in the following spring. Monitoring can also help improve management techniques and hone recommendations for future projects.
- Fulfill any permit reporting requirements. Read the specific conditions of any federal, state, or local permits issued for the project, and be sure to follow-up with any required reporting described.
- Repeat the process in future years. Successful invasive Phragmites management in heavily infested areas can take several years, and sometimes annual maintenance spot-treatment. This maintenance can be critical to preventing re-infestation of the invasive plant, but if done annually can be a very effective method for keeping your time and monetary costs low.
Statewide Efforts
Statewide Efforts are underway by a variety of state and local groups, trying to address invasive Phragmites in Michigan. For more information on these local and regional efforts, or for information on how to get involved in your area, please visit:
- Invasive Phragmites, video on Phragmites management on Beaver Island
- Phragmites info, Stewart Farm, Harsens Island
- Emmet County Phragmites Control Project, Tip of the Mitt Watershed Council
- Invasive Phragmites Control, Huron Pines