Contact information for Freedom of Information Requests, Post Commanders, and the Webmaster.
Information on Laws & Statutes relating to the Michigan State Police.
AMBER Alert, Michigan Blue Alert, Public Threat Alert, Vulnerable Adult Medical Alert
Information on carrying concealed pistols, permits, renewal, frequently asked questions, pistol free areas, pistol safety training course information, and more.
Freedom of Information Act Requests
Information on Domestic Violence, Fire Safety, Internet Safety, Safety for the Elderly, Safety Tips, Safe Driving, School Safety and Weather Safety.
Vulnerable or Impaired Person Enrollment
Information relating to fire investigations including field office locations, arson tip line ,fire investigation services and fire fighter training information.
Search is currently unavailable. Please try again later.
The web Browser you are currently using is unsupported, and some features of this site may not work as intended. Please update to a modern browser such as Chrome, Firefox or Edge to experience all features Michigan.gov has to offer.
Intoxilyzer 9000 Operator Guide For Law Enforcement
Verifies the performance of the analog to digital converter.
Analysis of room air for the presence of ethanol or interfering compounds. Normally has a concentration of 0.000 g/210L.
Confirms the firmware has not been altered or changed since creation.
Verifies the performance of the infrared (IR) control module (IR source and detector).
The amount of breath provided as part of a subject sample, in liters.
Biographical information pertaining to the subject and operator.
Process where the instrument conducts a series of self-checks. These include Analytical Checksum, Voltage/Current, Memory, Real Time Clock, Temp Regulation, ADC, Analytical Status, and Version Status. When passed, 'OK' appears on the diagnostic printout. (Used interchangeably with Operation System Check).
Indicates the pressure of the dry gas cylinder is too low and a test cannot be conducted until a fresh cylinder is installed, and the standard change test is completed.
Analysis of sample (dry gas) with a known ethanol concentration.
Length of time subject blew into the instrument, in seconds.
A test that does not go to completion, typically due to an exception code. There may be analytical results reported on an incomplete test, however, it is important to understand that the test is incomplete and may affect the interpretation of any reported result(s).
Validates the instrument's RAM (random access memory) and NAND flash (file storage) memory.
Number of attempts to provide the sample. (i.e., how many starts/stops).
Used interchangeably with Diagnostic Check. See Diagnostic Check.
Validates current time and date circuitry (date and time can still be set incorrectly, but a valid date and time is required for test to continue.
See dry gas calibration check.
Subject’s breath sample results.
Verifies breath tubes and internal cell temperatures are within the allowable range, and the temperature is stable.
Verifies the compatibility of the software/firmware.
Confirms the voltages/currents for power supply, pump, USB, Dry gas regulator, are all within normal limits.
Programmed time delay during a subject test that ensures the samples are separated by at least 2 minutes during the testing sequence.
