A complete list of all programs within the Department of Environment, Great Lakes, and Energy (EGLE)
Community involvement and public participation are an essential part of EGLE’s mission, vision, and values.
SARA Title III establishes requirements regarding emergency planning and "Community Right-to-Know" reporting on hazardous and toxic chemicals for federal, state, local, and tribal governments, as well as regulated facilities.
Resources and information on utilizing RRD's data exchange and the Inventory of Facilities.
An interactive map displaying contaminated sites throughout Michigan regulated under Parts 213, 201, and 211.
The Michigan Department of Environment, Great Lakes, and Energy’s (EGLE) Water Well Viewer (WWV), is an interactive mapping system that displays water wells along with other information, such as wellhead protection areas, underground storage tanks, and sites of environmental contamination. Water well locations have been identified by address matching, the use of global positioning systems (GPS), and by legal descriptions.
This system allows water well drilling and pump installation contractors to submit water well records.
EGLE's interactive calendar is designed to provide timely information on decisions before the Director, proposed settlements of contested cases, administrative rules promulgation, public hearings, meetings and comment deadlines, and environmental conferences, workshops and training programs.
Anyone wishing to formally serve legal documents upon the Department of Environment, Great Lakes, and Energy (EGLE), or its officers or employees, may do so by the following methods.
Search is currently unavailable. Please try again later.
The web Browser you are currently using is unsupported, and some features of this site may not work as intended. Please update to a modern browser such as Chrome, Firefox or Edge to experience all features Michigan.gov has to offer.
MiSTAR user guide
The MiSTAR Annular Pressure Test Form is for the digital submission of GRMD’s Annular Pressure Test document (EQP 7606). View the Standard Annular Pressure Test Guidance.
When a form file is uploaded the application performs validation against both the header information and all corresponding detail records. If any auto populated fields seem incorrect after you have uploaded the document to the MiSTAR application, please contact GRMD at EGLE-GRMDUIC@Michigan.gov. Below users can find descriptions, hints and validation for the Annular Pressure Test Form:
| Fields | Req. | Validation Criteria and Description |
|---|---|---|
| Operator Name | Yes | Official operator/permittee name with GRMD. |
| Operator Number | Yes | GRMD operator/permittee number. Must match operator uploading document. |
| 14-digit API Number | Yes | Must be 14-digit number, must belong to company listed in header, and must be listed as a Class II well in the GRMD database. If this field shows an error indicating it is not Class II and you believe it should be, please contact GRMD. |
| Well Name & Number | Auto | Well Name & Number from GRMD Permit. Field is auto-populated based on the API Number. |
| UIC Well Type | Auto | This field is auto-populated based on the API number. |
| Date of Test | Yes | MM/DD/YYYY. |
| Casing Diameter | Yes | Use decimal inches. |
| Tubing Diameter | Yes | Use decimal inches. |
| Gauge Serial Number | Yes | Provide serial number. |
| Type of Pressure Gauge | Yes | Either ‘Analog’ or ‘Digital’. |
| Pressure Gauge Comment | No | Provide gauge brand and any other relevant information. |
| Gauge Inch Face | Yes | Gauge face diameter in inches; use zero for digital gauge. Allows decimals. |
| Gauge PSI Range | Yes | Range of PSI gauge can measure. For example: 0-500. |
| Gauge PSI Increments | Yes | Increments of PSI gauge can measure. For example: 5 (psi). Use whole numbers. |
| New Gauge? | Yes | Yes or No. |
| Calibration Date | See above | The most recent calibration date for pressure gauge. Required for gauges that are not new. Recommended for new gauges. Format as MM/DD/YYYY. |
| Is Calibration Certification Submitted? | Yes | Yes or No. |
| Packer Type/Model | Yes | Describe packer type and model. |
| Packer Depth (MD ft) | Yes | Use Whole numbers. |
| Top of Permitted Injection Zone (MD ft) | Yes | Use Whole numbers. |
| Is Packer set at depth compliant with R324.804(2)? | Yes | Yes or No. Indicate if Packer is set within 100 ft of the base of injection casing or within 100 ft of the top perforation of injection interval. If not- justification is required. |
| Packer Notes- has justification been submitted? | See above | Yes or No. Field is required if previous question =No. Justification is required if the packer is more than 100 feet above the top of the injection zone or more than 100 ft above top perforation of injection interval. |
| Fluid Return (gallons) | Yes | Allows decimals. |
| Purpose of Test | Yes | Choose from: 5-Year Test, After Rework, New Permitted Well, Other |
| Max Allowable Pressure Change | Yes | Max allowable pressure change for the well is 5%: Initial Pressure x 0.05 psi Use PSIG, allows decimals. |
| Test Period Pressure Change | Yes | Change measured during test. Allows decimals. |
| Duration of Test (Min) | Yes | Use Whole number. |
| Test Result | Yes | Choose from: Pass or Fail. |
| Was test witnessed by an EGLE representative? | Yes | Must be Yes or No. |
| Name of EGLE Rep | See above | If above field is yes, give name of EGLE representative. |
| Comments | No | Describe any issues encountered during the test. |
For class II wells, readings must be taken at least every 10 minutes, for a minimum of 30 minutes. Annulus test pressure shall not be less than 300 psig.
| Fields | Req. | Validation Criteria and Description |
|---|---|---|
| Time (Military Time) | Yes | For each pressure measurement give time as HH:MM. |
| Annulus Pressure | Yes | Allows decimals. |
| Tubing Pressure | Yes | Allows decimals. |
