Skip to main content

Mechanical Permit Information

The Mechanical Code
The purpose of the mechanical code is to provide adequate requirements considered essential for the safe installation of all mechanical equipment in order to protect the public safety, health and welfare. The code sets forth comprehensive regulations for the safe installation of mechanical equipment and systems.

What is the mechanical code?
The Michigan Mechanical Code regulates the design, installation, maintenance, alteration, and inspection of mechanical systems, including heating systems, ventilating systems, steam and hot water heating systems, process piping, boilers and pressure vessels, appliances utilizing gas, liquid or solid fuel, chimneys and vents, mechanical refrigeration systems, fireplaces, barbecues, incinerators, crematories, fire suppression systems and system utilizing solar or geothermal energy. Presently, provisions for one- and two-family dwellings are included in the Michigan Residential Code.

Do you need a license to do mechanical work?
A mechanical contractor's license with the appropriate classification is required for the performance of installing, altering, or servicing the following: (1) Hydronic heating and cooling and process piping, (2) HVAC equipment, (3) Ductwork, (4) Refrigeration, (5) Limited Heating service, (6) Unlimited Heating Service, (7) Limited Refrigeration and air conditioning service (8) Unlimited refrigeration and air conditioning service, (9) Fire Suppression, (10) Specialty.  However, an owner of a single family dwelling who will occupy or occupies the residence may perform the work without a license.

Are mechanical permits required?
Except for replacement of minor parts, mechanical work shall not be started until a permit for such work has been issued by the appropriate enforcing agency.  A homeowner must secure a permit for work they are performing at their residence, and mechanical contractors are responsible for permits on work they are performing on behalf of an owner.

Permits are not required for portable equipment (heating, ventilation, cooling units, evaporative cooler, gas burners with less than 30,000 Btu/hr.), self-contained refrigeration equipment and window-type air conditioners of not more than 1.5 hp, and oil burners not requiring connection to a flue (oil stoves, heaters equipped with wick).

Permits for steam or vapor boilers carrying a pressure of not more than 15 p.s.i.g., which are located in private residences or in apartment houses of less than 6 families must be secured by a licensed mechanical contractor classified in the hydronic heating and cooling, and process piping classifications.

Commercial Kitchen Hoods/Smoke Test Procedure

Permits can be checked and obtained expeditiously online at:  https://aca-prod.accela.com/lara/.  Additionally, permits can be obtained via mail; however, applying by mail may cause delays in the application process.

Mechanical Permit Application *
Mechanical Inspector Region Map

Prior to applying for a mechanical permit, it is suggested the applicant review the Statewide Jurisdiction List. This information is updated regularly due to changes in the mechanical code enforcement that may be conducted by either the state, county or local unit of government. A mechanical permit application must be submitted to the appropriate enforcing agency and a permit shall be secured prior to any work.

Questions regarding mechanical permits should be directed to the Building Trades Section at 517-241-9313 or bccpermits@michigan.gov.